Space
wiki
(21)
Website
blog
(1)
Call2 Monitoring ALEXA
blog
(1)
Call2 Monitoring C-KOMPAI
blog
(8)
Call2 Monitoring FIDELIO
blog
(4)
Call3 Monitoring MoFTaG
blog
(1)
Call3 Monitoring OMNIWORKS
blog
(1)
Call3 Monitoring PsyIntEC
blog
(1)
Call3 Monitoring RODIN
Type
(21)
end reviewed
(21)
reviewed

Results 1 - 10 of 38 sort by

blogPost
C4Gopen controller modalities have been studied in order to select a suitable one for the implementation of the manual guidance. Modality 5 has been selected. Direct kinematics and direct/inverse differential kinematics were coded in the realtime PC programming environment. The ATI functions were ported to Linux and tested...
[Last edited Dec 5, 2011 ]
blogPost
Fifth ECHORD public summary. Project C-Kompai During February and March 2012 we have created of a document describing the capabilities and behavior of the Kompai robot before and after the C-Brain of Cognitive Robots is being installed. The enhanced capabilities are added to the original Kompai GUI with three buttons...
[Last edited by Florian Röhrbein, Apr 18, 2012 ]
blogPost
Visual servoing control for contour following To support the scanning procedure a visual servoing control able to move the robot along the deburring path, keeping the camera (and the laser) at a fixed distance from the wheel and centered on the edge, is required (Fig. 1). Figure 1 - Architecture of the visual servoing...
[Last edited Aug 13, 2012 ]
blogPost
The PsyIntEC project has commenced on time and progress is being made in all aspects of the project. The overall team is also quite large, cinluding the PI, a technical team leader/postdoc, two PhD students (one partially funded by the proejct) and 6 masters thesis students. Hardware acquisition is underway and the focus of...
[Last edited by Florian Röhrbein, Apr 27, 2012 ]
blogPost
System integration Considering that the role of the vision system should be to determine the deburring profile and to measure the length and depth of burrs, as burrs in this kind of machining process are characterized by depth/length of 1-2 millimeters, the accuracy of the vision system should be in the order of tens of...
[Last edited Oct 19, 2012 ]
blogPost
The FIDELIO project wants to investigate the feasibility of an innovative robot programming approach, based on the Learning From Observation paradigm, in an industrial application scenario exemplified by a fixtureless wheel deburring task. To this aim, a robotised cell is being set up, composed of a Comau Smart-Six...
[Last edited Jul 26, 2011 ]
blogPost
The preparation of the experimental setup was completed. The Smart Six robot was installed, the external PC for the open controller was set up, the force/torque sensor was delivered.
[Last edited Oct 1, 2011 ]
blogPost
Walk-through programming The programming mode has been realised through a set of admittance controllers. It must be noticed that the tests reaveal that the classical implementation of the walk-through programming mode does not allow for motion in contact with a surface. It turns out that realising the walk-through...
[Last edited Apr 15, 2012 ]
blogPost
Walk-through programming The problem of walk-through programming in contact with an hard surface is still under studying. The main concerns are related to the implementation of a robust algorithm to detect the contact and estimate the normal to the surface. Wheel localisation and burr analysis To localise the wheel a...
[Last edited Jul 8, 2012 ]
blogPost
Contour following and profile estimation Three different experiments have been performed to test the contour following algorithm. The first one concerns the measurement of a linear profile with an artificial burr (Figs. 1-2). Fig. 1 Fig. 2 Fig. 3 The two other experiments show the performance of the contour following system...
[Last edited Dec 29, 2012 ]